jthomas
04-04 09:49 PM
I need expert advice -
My I-140 has been approved and I-485 pending for more than 18 months. I have a valid EAD & AP. I also have a valid H1-B visa valid till 2011,
that I am using for my current employment with my current employer
1. If I get laid-off, how long can I stay in US without another job?
With EAD you are okay.
2. I understand that in order to maintain my eligibility to "port" to a new employer / sponsor under AC21, I should have another job in same or similar occupation. Till I find another job, am I allowed to do some part-time job in different occupation?
Answer :- I don't think so. If you are doing a part time job and if USCIS comes to know because of 1099 you may have a problem. I don't think you will have a problem if you accept cash and a evidence you never worked but helped your friend.
3. If new employer gives me the option to move permanently to its subsidiary in another country, what are the available option for me to continue with green card processing?
Answer :- AP is used for emergency. I don't know much but one of IV members went to india and was working for his employer from india.
4. If after going out of the country , I want to come back in future before Green card approval, what will be the available options?
Answer :- Keep renewing your AP and you need to be present in US when AP is been renewed. I am not sure of it. Sorry.
My I-140 has been approved and I-485 pending for more than 18 months. I have a valid EAD & AP. I also have a valid H1-B visa valid till 2011,
that I am using for my current employment with my current employer
1. If I get laid-off, how long can I stay in US without another job?
With EAD you are okay.
2. I understand that in order to maintain my eligibility to "port" to a new employer / sponsor under AC21, I should have another job in same or similar occupation. Till I find another job, am I allowed to do some part-time job in different occupation?
Answer :- I don't think so. If you are doing a part time job and if USCIS comes to know because of 1099 you may have a problem. I don't think you will have a problem if you accept cash and a evidence you never worked but helped your friend.
3. If new employer gives me the option to move permanently to its subsidiary in another country, what are the available option for me to continue with green card processing?
Answer :- AP is used for emergency. I don't know much but one of IV members went to india and was working for his employer from india.
4. If after going out of the country , I want to come back in future before Green card approval, what will be the available options?
Answer :- Keep renewing your AP and you need to be present in US when AP is been renewed. I am not sure of it. Sorry.
wallpaper (Miley Cyrus#39; Tattoo Poll)
FredG
January 31st, 2005, 12:09 PM
(not a tight crop, which is probably what it sounded like I meant).The difference was probably in my interpretation, rather than in your presentation.
jin108
08-02 08:49 PM
Hi,
I am one of many people here waiting for the date to be able to apply for I-485 because of visa retrogression. I have 3 more H-1 years so I am considering changing a job in category EB2 so the process can be faster (my PD is Jan 2004 with approved I-140). My question is whether this position below can be considered in EB2 or not. To my knowledge on Eb2, it must be more than 5 years experience with BS or MS. I have a MS, but my work experience in US is total 4 years 4 months (intern 10 months in US during MS + 11 months with OPT after MS + 2yrs6months with H-1B).
This is just a part of the job description:
- BS Degree plus 3-5 Yrs experience or MS Degree plus 2 Yrs experience.
Thanks.
I am one of many people here waiting for the date to be able to apply for I-485 because of visa retrogression. I have 3 more H-1 years so I am considering changing a job in category EB2 so the process can be faster (my PD is Jan 2004 with approved I-140). My question is whether this position below can be considered in EB2 or not. To my knowledge on Eb2, it must be more than 5 years experience with BS or MS. I have a MS, but my work experience in US is total 4 years 4 months (intern 10 months in US during MS + 11 months with OPT after MS + 2yrs6months with H-1B).
This is just a part of the job description:
- BS Degree plus 3-5 Yrs experience or MS Degree plus 2 Yrs experience.
Thanks.
2011 Miley Cyrus has a TATTOO!
Ann Ruben
02-16 02:02 AM
The new PW system seems to be taking about 4-5 weeks, not months.
more...
immi_enthu
08-06 12:22 PM
12 calendar days. My I 140 was originally applied on 01/08/2007 upgraded to premium on 06/26/2007 there was a RFE ability to pay , reponse for RFE received on 07/26/2007. we called 18663155718 today, the IO officer said my case is approved today. online status still says it's pending.
Unfortunately the premium service on I 140 is not reinstated yet. Note I upgraded before (07/01/2007)it was suspended . Sorry for the confusion
Unfortunately the premium service on I 140 is not reinstated yet. Note I upgraded before (07/01/2007)it was suspended . Sorry for the confusion
immgirl
06-03 12:20 AM
Don't be ridiculous. If your I-140 and I-485 are approved, this will not affect it. They are auditing PERM that is in process. FYI- Your employer needs to show that there are no qualified US workers for the position that they are recruiting for on PERM. This audit is about employers using FDBL to try to disqualify qualified US workers. This audit will delay PERM applications, but will not affect I-140 s or I-485's that are approved.
more...
GCwaitforever
03-07 06:55 PM
Tagging members who paid so far and who has not is a start for the membership drive. Once we cover the registered members and encourage them to contribute, then we can move on to our friends and companies.
2010 Photos of Miley wearing a
WaitingYaar
01-18 09:00 PM
Is it possible to set up a poll to monitor the rate of I-140 approvals from NSC for eb categories?
more...
rajeshiv
07-13 12:05 AM
what case are you talking about ... is it H1 or 485?
-RR
-RR
hair Miley Cyrus was sporting a
milind70
06-25 09:39 PM
My H4 spouse left the country for vacation on May 25 (before h4 expiry)
Attorney filed 7th year ext and I 539 on Jun14.
My 6th year of H1 ended on Jun 17.
The attorney was not reachable by HR or myself. HR calls me today about problem with H4 and the attorney wants to discuss. What the heck ? Do they file I-539 when some one is not in the country ? She and I always maintained proper status. What can be the problem? I am freaking out to get my h1 ext approval asap and bring her back to file 485. Now my head is exploding. Any clues ? I cant bear this suspense.
you dont require to file I 539 since she is out of the country ,so currently she has no status .
Attorney filed 7th year ext and I 539 on Jun14.
My 6th year of H1 ended on Jun 17.
The attorney was not reachable by HR or myself. HR calls me today about problem with H4 and the attorney wants to discuss. What the heck ? Do they file I-539 when some one is not in the country ? She and I always maintained proper status. What can be the problem? I am freaking out to get my h1 ext approval asap and bring her back to file 485. Now my head is exploding. Any clues ? I cant bear this suspense.
you dont require to file I 539 since she is out of the country ,so currently she has no status .
more...
helpfriends
04-16 01:22 PM
they entered on a green form and no, it is not attached to the L1A Petition approval. So, they can just leave and then get stamped coming back in?
hot Did Demi follow Miley Cyrus
kanakabyraju
07-16 01:39 PM
I think the best way is to bring her back, because its Preferable to go to the same doctor
were you had done intial exams
Moreover to the best of my knowledge this cannot be done in india
I had to call my wife back for the same reason in May
hope this helps
thanks for the helpful info. Any other had similar experience ?
were you had done intial exams
Moreover to the best of my knowledge this cannot be done in india
I had to call my wife back for the same reason in May
hope this helps
thanks for the helpful info. Any other had similar experience ?
more...
house miley-cyrus-pink-ikini-
illinois_alum
09-02 04:40 PM
How long did it take them to send the SR response? When did u open the SR? Thanks in advance...
I think this is a standard response...saw it on some other post as well...
I think this is a standard response...saw it on some other post as well...
tattoo miley cyrus tattoo just
kennyc
May 24th, 2005, 07:50 PM
Canon 20D EFS 17-85 IS lens:
KAC
KAC
more...
pictures miley-cyrus-boob-tattoo-3
serg
07-16 05:33 PM
Sent I-140 on October 2nd. Status showing as it's recd. Anybody's I-140 approved in that range?
Thanks,
GK
Oct 16, 2006, still there, no updates
Thanks,
GK
Oct 16, 2006, still there, no updates
dresses Miley Cyrus JET SKIING With
Chris Rock
08-12 12:42 PM
bump
more...
makeup Photos from Miley Cyrus Reacts
cygent
04-10 09:36 PM
Welcome to Hell brother... Hahahaha ;-) Chill
You can't be serious. Get up on your 2 feet, you are lucky you have IV now, Back in the day, we never had any support.
Be Proactive & prepare for the worst. That's the best advice, gleaned from experience, the best teacher.
Hi,
I got my H1 in 2004 thru an body shopper. I completed my first three year period. got next 3 yr extension recently. when would be right time to apply GC? what category is suggested EB2/EB3?
How long will it take to clear labour?
Thanks for valuable suggestions
You can't be serious. Get up on your 2 feet, you are lucky you have IV now, Back in the day, we never had any support.
Be Proactive & prepare for the worst. That's the best advice, gleaned from experience, the best teacher.
Hi,
I got my H1 in 2004 thru an body shopper. I completed my first three year period. got next 3 yr extension recently. when would be right time to apply GC? what category is suggested EB2/EB3?
How long will it take to clear labour?
Thanks for valuable suggestions
girlfriend Miley Cyrus: Tit for Tat
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
hairstyles mileytattoo-1260195213
cheg
08-21 05:07 PM
I see. I thought it was your lawyer that sent all your documents. So do you actually have a lawyer?
My case was filed by a human resource person not a lawer. Human resource thinks I am ok but I do not think they really know the law. I am so scared...I do not know what to do. Ohhhh God..Life...
My case was filed by a human resource person not a lawer. Human resource thinks I am ok but I do not think they really know the law. I am so scared...I do not know what to do. Ohhhh God..Life...
acecupid
08-01 10:45 AM
If you look at the new features list:
A customer-centric home page that provides applicants with a �one-stop shop� of immigration services information.
Simplified navigation and improved search capability.
Enhanced customer service tools including expanded Case Status Online with both email and text functionality.
Information that is written clearly and meets the needs of our customers.
It is pretty vague. They may just make some cosmetic changes for the existing website. I dont see anything new here. I hope they prove me wrong!
A customer-centric home page that provides applicants with a �one-stop shop� of immigration services information.
Simplified navigation and improved search capability.
Enhanced customer service tools including expanded Case Status Online with both email and text functionality.
Information that is written clearly and meets the needs of our customers.
It is pretty vague. They may just make some cosmetic changes for the existing website. I dont see anything new here. I hope they prove me wrong!
payur
03-11 08:11 PM
Ok, here is the response from my lawyer:
"You can give back both but make sure that you have a photocopy in your
file. Actually, the 2 I-94 cards have the same number."
"You can give back both but make sure that you have a photocopy in your
file. Actually, the 2 I-94 cards have the same number."
No comments:
Post a Comment